The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.

[Book] [Expand] [Collapse] [Search Forms] [Previous Section with Hits] [Next Section with Hits] [Clear Search] [Help]

Expand Search

A: General [Table of Contents] C: Definitions

DNV-OS-C201 Structural Design of Offshore Units (WSD method)

[-] Sec.1: Introduction
[-] B: References

Sec.1
B. References

Sec.1
B 100   General

Sec.1 B
101   The DNV documents in Table B1 are referred to in the present standards and contain acceptable methods for fulfilling the requirements in this standard.

Sec.1 B
102   The latest valid revision of the DNV reference documents in Table B2 applies. See also current DNV List of Publications.

Sec.1 B
103   The documents listed in Table B2 are referred in the present standard. The documents include acceptable methods for fulfilling the requirements in the present standard and may be used as a source of supplementary information. Only the referenced parts of the documents apply for fulfilment of the present standard.

Sec.1 B
Table B1 DNV Reference Documents 
Reference Title 
DNV-OS-A101 Safety Principles and Arrangement 
DNV-OS-B101 Metallic Materials 
DNV-OS-C101 Design of Offshore Steel Structures, General (LRFD method) 
DNV-OS-C301 Stability and Watertight Integrity 
DNV-OS-C401 Fabrication and Testing of Offshore Structures 
DNV-OS-D101 Marine Machinery Systems and Equipment 
DNV-OS-E301 Position Mooring 
DNV-OS-F201 Dynamic Risers 
DNV-RP-A201 Plan Approval Documentation Types - Definitions 
DNV-RP-B401 Cathodic Protection Design 
DNV-RP-C103 Column Stabilised Units 
DNV-RP-C201 Buckling Strength of Plated Structures 
DNV-RP-C202 Buckling Strength of Shells 
DNV-RP-C204 Design against Accidental Loads 
DNV-RP-C203 Fatigue Strength Analysis of Offshore Steel Structures 
DNV-RP-C205 Environmental Conditions and Environmental Loads 
Classification Note 30.1 Buckling Strength Analysis of Bars and Frames, and Spherical Shells 
Classification Note 30.4 Foundations 
Classification Note 31.5 Strength Analysis of Main Structures of Self-elevating Units 

Sec.1 B
Table B2 Other references  
Reference Title 
AISC-ASD Manual of Steel Construction ASD 
API RP 2A - WSD with supplement 1 Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design 
API RP 2T Planning, Designing and Constructing Tension Leg Platforms 
BS 7910 Guide on methods for assessing the acceptability of flaws in fusion welded structures 
NACE TPC Publication No. 3. The role of bacteria in corrosion of oil field equipment 
SNAME 5-5A Site Specific Assessment of Mobile Jack-Up Units 

A: General [Table of Contents] C: Definitions