![[-]](/dwicons/i_colpse.gif)
The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
|
| Sec.1: Introduction |
![[+]](/dwicons/i_expand.gif)
| A: General |
|
| B: References |
|
| C: Definitions |
|
| D: Abbreviations and Symbols |
|
| Sec.2: Design Principles |
|
| A: Introduction |
|
| B: General Design Considerations |
|
| C: Design Conditions |
|
| D: Loading Conditions |
|
| E: Design by the WSD Method |
|
| F: Design Assisted by Testing |
|
| Sec.3: Loads and Load Effects |
|
| A: Introduction |
|
| B: Basis for Selection of Loads |
|
| C: Permanent Functional Loads |
|
| D: Variable Functional Loads |
|
| E: Environmental Loads |
|
| F: Combination of Environmental Loads |
|
| G: Accidental Loads |
|
| H: Deformation Loads |
|
| I: Fatigue loads |
|
| J: Load Effect Analysis |
|
| Sec.4: Structural Categorisation, Material Selection and Inspection Principles |
|
| A: General |
|
| B: Temperatures for Selection of Material |
|
| C: Structural Category |
|
| D: Structural Steel |
|
| Sec.5: Structural Strength |
|
| A: General |
|
| B: Flat Plated Structures and Stiffened Panels |
|
| C: Shell Structures |
|
| D: Tubular Members, Tubular Joints and Conical Transitions |
|
| E: Non-Tubular Beams, Columns and Frames |
|
| Sec.6: Section Scantlings |
|
| A: General |
|
| B: Strength of Plating and Stiffeners |
|
| C: Bending and Shear in Girders |
|
| Sec.7: Fatigue |
|
| A: General |
|
| Sec.8: Accidental Conditions |
|
| A: General |
|
| B: Design Criteria |
|
| Sec.9: Weld Connections |
|
| A: General |
|
| B: Types of Welded Steel Joints |
|
| C: Weld Size |
|
| Sec.10: Corrosion Control |
|
| A: General |
|
| B: Techniques for Corrosion Control Related to Environmental Zones |
|
| C: Cathodic Protection |
|
| D: Coating Systems |
|
| Sec.11: Special Considerations for Column Stabilised Units |
|
| A: General |
|
| B: Structural Categorisation, Material Selection and Inspection Principles |
|
| C: Design and Loading Conditions |
|
| D: Structural Strength |
|
| E: Fatigue |
|
| F: Accidental Conditions |
|
| G: Redundancy |
|
| H: Structure in Way of a Fixed Mooring System |
|
| I: Structural Details |
|
| Sec.12: Special Considerations for Self-Elevating Units |
|
| A: Introduction |
|
| B: Structural Categorisation, Material Selection and Inspection Principles |
|
| C: Design and Loading Conditions |
|
| D: Environmental Conditions |
|
| E: Method of Analysis |
|
| F: Design Loads |
|
| G: Structural Strength |
|
| H: Fatigue Strength |
|
| I: Accidental Conditions |
|
| J: Miscellaneous requirements |
|
| Sec.13: Special Considerations for Tension Leg Platforms (TLP) |
|
| A: General |
|
| B: Structural Categorisation, Material Selection and Inspection Principles |
|
| C: Design Principles |
|
| D: Design Loads |
|
| E: Global Performance |
|
| F: Structural Strength |
|
| G: Fatigue |
|
| H: Accidental Condition |
|
| Sec.14: Special Considerations for Deep Draught Floaters (DDF) |
|
| A: General |
|
| B: Non-Operational Phases |
|
| C: Structural Categorisation, Selection of Material and Extent of Inspection |
|
| D: Design Loads |
|
| E: Deformation Loads |
|
| F: Accidental Loads |
|
| G: Fatigue Loads |
|
| H: Combination of Loads |
|
| I: Load Effect Analysis in Operational Phase |
|
| J: Load Effect Analysis in Non-Operational Phases |
|
| K: Structural Strength |
|
| L: Fatigue |
|
| M: Accidental Condition |
|
| App.A: Cross Sectional Types |
|
| A: Cross Sectional Types |
|
| App.B: Methods and Models for Design of Column-Stabilised Units |
|
| A: Methods and Models |
|
| App.C: Permanently Installed Units |
|
| A: Introduction |
|
| B: Inspection and Maintenance |
|
| C: Fatigue |
| C100: Design fatigue factors |
|
|
| App.D: Certification of Tendon System |
|
| A: General |
|
| B: Equipment categorization |
|
| C: Fabrication Record |
|
| D: Documentation Deliverables for Certification of Equipment |
|
| E: Tendon Systems and Components |
|
| F: Categorisation of Tendon Components |
|
| G: Tendon Fabrication |