![[Table of Contents]](/dwicons/b_toc.gif)
The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
|
|
DNV-OS-C401 Fabrication and Testing of Offshore Structures |
![[-]](/dwicons/i_colpse.gif)
| Ch.2: Technical Provisions |
|
| Sec.1: Welding Procedures and Qualification of Welders |
Ch.2
|
| A: Introduction |
| A100: General |
| A200: Wide gap welding |
| A300: Welding processes |
|
| B: Welding Procedures |
| B100: General |
| B200: Preliminary welding procedure specification, pWPS |
| B300: Welding Procedure qualification test (WPQT) |
| B400: Welding procedure qualification record (WPQR) |
| B500: Welding procedure specifications (WPS) |
|
| C: Welding Procedure Tests, C-Mn Steel and Low Alloy Steel |
| C100: General |
| C200: Butt welds on plates |
| C300: Butt welds in pipes |
| C400: Full penetration T-, Y-, and K- joints |
| C500: Tubular joints/ Branch connections |
| C600: Fillet welds |
| C700: Re-testing |
| C800: Validity of a WPS |
| C900: Fracture mechanic (FM) testing |
|
| D: Welding Procedure Tests, Aluminium |
| D100: General |
| D200: Butt welds |
| D300: Fillet welds |
| D400: Re-testing |
|
| E: Welding Procedure Tests, Stainless Steel |
| E100: General |
| E200: Supplementary requirements for austenitic stainless steel |
| E300: Supplementary requirements for ferritic-austenitic stainless steel (duplex) |
|
| F: Qualification of Welders |
| F100: General |
| F200: Standards for qualification testing |
|
| G: Testing |
| G100: General |
| G200: Tensile testing at ambient temperature |
| G300: Bend testing |
|
|