The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.

[Book] [Expand] [Collapse] [Search Forms] [Previous Section with Hits] [Next Section with Hits] [Clear Search] [Help]

Expand Search

R: Requirements for other design criteria [Table of Contents] Sec.7: Joints and Interfaces

DNV-OS-C501 Composite Components

[-] Sec.6: Failure Mechanisms & Design Criteria
[-] R: Requirements for other design criteria
[-] R100: General

Sec.6
R 100   General

Sec.6 R
101   If a structure or component shows a failure mechanism not described above it may be necessary to describe a design criterion for this failure mechanism.

Sec.6 R
102   All design criteria shall be verified against experimental evidence. The model factor assigned to the design criterion shall compensate for the discrepancies between prediction and experiment. The model factor is a deterministic factor.

Sec.6 R
103   It shall be confirmed that the design criterion is of general nature and does not just apply to one material or one load case, unless the criterion is only used for that particular condition.

Sec.6 R
104   The partial safety factors in the criterion shall calibrated by probabilistic methods to ensure a consistent level of safety with respect to the rest of the standard.
R: Requirements for other design criteria [Table of Contents] Sec.7: Joints and Interfaces