The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
|
| Sec.1: General |
|
| Sec.2: Design Philosophy and Design Principles |
|
| Sec.3: Design Input |
|
| Sec.4: Materials - Laminates |
|
| Sec.5: Materials - Sandwich Structures |
|
| Sec.6: Failure Mechanisms & Design Criteria |
|
| Sec.7: Joints and Interfaces |
|
| Sec.8: Safety-, Model- and System Factors |
|
| Sec.9: Structural Analysis |
|
| Sec.10: Component Testing |
|
| Sec.11: Fabrication |
|
| Sec.12: Operation, Maintenance, Reassessment, Repair |
|
| Sec.13: Definitions, Abbreviations & Figures |
|
| Sec.14: Calculation Example: Two Pressure Vessels |
|
| A: Objective |
|
|
|
| B100: Overview |
| B200: General function (ref. section 3 B100) |
| B300: Product specifications (ref. section 3 B200) |
| B400: Division of the product into components (ref. section 3 C) |
| B500: Phases and safety class definitions (ref. section 3 D and E) |
| B600: Functional requirements (ref. section 3 F) |
| B700: Failure modes (ref. section 3 G) |
| B800: Loads (ref. section 3 I) |
| B900: Environment (ref. section 3 J) |
|
| C: Failure mechanisms |
|
| D: Material properties |
|
| E: Analysis of gas vessel with liner |
|
| F: Non-linear analysis of vessel for water without liner |
|
| G: Linear analysis of vessel for water without liner |
|
| App.A: Check-lists for Design Input |
|
| App.B: Lay-up and laminate specification |
|
| App.C: Test methods for laminates |
|
| App.D: Test methods for sandwich materials |
|
| App.E: Tables of Safety Factors |
|
| App.F: Example for representative data Stitch-bonded unidirectional (UD) plies - E glass polyester |
|
| App.G: Example for representative data Unidirectional carbon tape AS4 12k |
|
| App.H: Example for Representative Data: Unidirectional Carbon Tapes made of TPW tape with "5631" fibres |
|
| App.I: Example for representative data Unidirectional carbon tape TPW 0434 Prepreg |