![[+]](/dwicons/i_expand.gif)
The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
|
| Sec.1: General |
|
| Sec.2: Design Philosophy and Design Principles |
|
| Sec.3: Design Input |
|
| Sec.4: Materials - Laminates |
|
| Sec.5: Materials - Sandwich Structures |
|
| Sec.6: Failure Mechanisms & Design Criteria |
|
| Sec.7: Joints and Interfaces |
|
| Sec.8: Safety-, Model- and System Factors |
|
| Sec.9: Structural Analysis |
|
| Sec.10: Component Testing |
|
| Sec.11: Fabrication |
|
| Sec.12: Operation, Maintenance, Reassessment, Repair |
|
| Sec.13: Definitions, Abbreviations & Figures |
![[-]](/dwicons/i_colpse.gif)
| Sec.14: Calculation Example: Two Pressure Vessels |
|
| A: Objective |
|
| B: Design input |
|
| C: Failure mechanisms |
|
| D: Material properties |
|
| E: Analysis of gas vessel with liner |
|
|
|
| F100: General |
| F200: Analysis procedure (ref. section 9 B) |
| F300: Matrix cracking (short term) at 1.48 MPa pressure (ref. section 6 D) |
| F400: Matrix cracking under long-term static loads (ref. section 4 C400) |
| F500: Matrix cracking under long-term cyclic fatigue loads (ref. section 4 C900) |
| F600: Fibre failure - short term (ref. section 6 C) |
| F700: Fibre dominated ply failure due to static long term loads (ref. section 6 J) |
| F800: Fibre dominated ply failure due to cyclic fatigue loads (ref. section 6 K) |
| F900: Unacceptably large displacement (ref. section 6 I) |
| F1000: Impact resistance (ref. section 6 L) |
| F1100: Explosive decompression (ref. section 6 O) |
| F1200: Chemical decomposition (ref. section 6 Q) |
| F1300: Component testing (ref. section 10) |
| F1400: Summary evaluation |
|
| G: Linear analysis of vessel for water without liner |
|
| App.A: Check-lists for Design Input |
|
| App.B: Lay-up and laminate specification |
|
| App.C: Test methods for laminates |
|
| App.D: Test methods for sandwich materials |
|
| App.E: Tables of Safety Factors |
|
| App.F: Example for representative data Stitch-bonded unidirectional (UD) plies - E glass polyester |
|
| App.G: Example for representative data Unidirectional carbon tape AS4 12k |
|
| App.H: Example for Representative Data: Unidirectional Carbon Tapes made of TPW tape with "5631" fibres |
|
| App.I: Example for representative data Unidirectional carbon tape TPW 0434 Prepreg |