![[+]](/dwicons/i_expand.gif)
The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
|
| Sec.1: General |
|
| Sec.2: Design Philosophy and Design Principles |
|
| Sec.3: Design Input |
![[-]](/dwicons/i_colpse.gif)
| Sec.4: Materials - Laminates |
|
| A: General |
|
| B: Static properties |
|
| C: Properties under long term static and cyclic and high rate loads |
|
| D: Other properties |
|
| E: Influence of the environment on properties |
|
| F: Influence of process parameters |
|
| G: Properties under fire |
|
|
|
| H100: Introduction |
| H200: General test requirements |
| H300: Selection of material qualification method |
| H400: Direct measurement |
| H500: Representative data |
| H600: Qualification against representative data |
| H700: Confirmation testing for static data |
| H800: Confirmation testing for long term data - high safety class |
| H900: Confirmation testing for long term data - normal safety class |
| H1000: Use of manufacturers data or data from the literature as representative data |
| H1100: Confirming material data by component testing |
| H1200: Comparing results from different processes and lay-ups |
|
| I: Properties with damaged or nonlinearly deformed matrix |
|
| Sec.5: Materials - Sandwich Structures |
|
| Sec.6: Failure Mechanisms & Design Criteria |
|
| Sec.7: Joints and Interfaces |
|
| Sec.8: Safety-, Model- and System Factors |
|
| Sec.9: Structural Analysis |
|
| Sec.10: Component Testing |
|
| Sec.11: Fabrication |
|
| Sec.12: Operation, Maintenance, Reassessment, Repair |
|
| Sec.13: Definitions, Abbreviations & Figures |
|
| Sec.14: Calculation Example: Two Pressure Vessels |
|
| App.A: Check-lists for Design Input |
|
| App.B: Lay-up and laminate specification |
|
| App.C: Test methods for laminates |
|
| App.D: Test methods for sandwich materials |
|
| App.E: Tables of Safety Factors |
|
| App.F: Example for representative data Stitch-bonded unidirectional (UD) plies - E glass polyester |
|
| App.G: Example for representative data Unidirectional carbon tape AS4 12k |
|
| App.H: Example for Representative Data: Unidirectional Carbon Tapes made of TPW tape with "5631" fibres |
|
| App.I: Example for representative data Unidirectional carbon tape TPW 0434 Prepreg |