DNV-OS-C502 Offshore Concrete Structures

The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.

DNV-OS-C502 Offshore Concrete Structures

Sec.1: Introduction

A: General

A100: Introduction

Sec.1
A 100 Introduction

Sec.1 A
101   This offshore standard provides principles, technical requirements and guidelines for the design, construction and in service inspection of Offshore Concrete Structures. The Concrete Structures may be a floating or gravity based structure.

Sec.1 A
102   This standard shall be used together with the general offshore design standards for steel structures DNV-OS-C101, DNV-OS-C102, DNV-OS-C103, DNV-OS-C105 and DNV-OS-C106. These standards cover a wide range of different structures

Sec.1 A
103   The standard covers design, fabrication/construction, installation and inspection of offshore concrete structures.

Sec.1 A
104   Design, construction, inspection and maintenance of Offshore Concrete LNG Terminals are covered by DNV-OS-C503.

Sec.1 A
105   For design and construction of offshore concrete wind turbines, reference is made to DNV-OS-J101 "Design of Offshore Wind Turbines Structures".

Sec.1 A
106   This standard cover design of platforms/structures for oil production, oil storage, harbours and deep water foundation of bridges where reinforced and prestressed concrete is used as structural material.

For structures like deep water foundation of bridges and harbours special considerations will be required on load specifications.

DNV-OS-C502 Offshore Concrete Structures

Sec.1A 100 Introduction

Sec.1
A 100 Introduction