The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.

[Book] [Expand] [Collapse] [Search Forms] [Previous Section with Hits] [Next Section with Hits] [Clear Search] [Help]

Expand Search

A: General [Table of Contents] C: Informative References

DNV-OS-D101 Marine and Machinery Systems and Equipment

[-] Ch.1: Gearing
[-] Sec.1: Introduction
[-] B: Normative References

Ch.1 Sec.1
B. Normative References

Ch.1 Sec.1
B 100   General

Ch.1 Sec.1 B
101   The following standards include provisions which, through reference in the text constitute provisions of this offshore standard. The latest issue of the references shall be used unless otherwise agreed.

Ch.1 Sec.1 B
102   Other recognised standards may be used provided it can be demonstrated that these meet or exceed the requirements of the standards referenced below.

Ch.1 Sec.1 B
103   Any deviations, exceptions and modifications to the design codes and standards shall be documented and agreed between the supplier, purchaser and verifier, as applicable.

Ch.1 Sec.1
B 200   Reference documents

Ch.1 Sec.1 B
201   Applicable DNV publications are given in Table B1.

Ch.1 Sec.1 B
Table B1 DNV Rules, Classification Notes, Offshore Standards and Recommended Practices 
Reference Title 
DNV-OS-A101 Safety Principles and Arrangement 
DNV-OS-B101 Metallic Materials 
DNV-OS-C102 Structural Design of Offshore Ships 
DNV-OS-C103 Structural Design of Column Stabilised Units (LRFD method) 
DNV-OS-C104 Structural Design of Self-elevating Units (LRFD method) 
DNV-OS-C105 Structural Design of TLPs (LRFD method) 
DNV-OS-C106 Structural Design of Deep Draught Floating Units/Spars (LRFD and WSD Method) 
DNV-OS-C107 Structural Design of Ship-shaped Drilling and Well Service Units 
DNV-OS-C301 Stability and Watertight Integrity 
DNV-OS-C401 Fabrication and Testing of Offshore Structures 
DNV-OS-D201 Electrical Installations 
DNV-OS-D202 Automation, Safety, and Telecommunication Systems 
DNV-OS-E101 Drilling Plant 
DNV-OS-E201 Hydrocarbon Production Plant 
DNV-OS-E301 Position Mooring 
DNV-RP-A201 Plan Approval Documentation Types - Definitions 
 Rules for Classification of Ships 
Classification Note 41.2 Calculation of gear rating for marine transmissions 



Ch.1 Sec.1 B
202   Other reference documents are given in Table B2 and in Ch.2 Sec. 5 B.

Ch.1 Sec.1 B
Table B2 Normative references 
Reference Title 
ICLL  International Convention on Load Lines, 1966 
IMO MODU Code 1989 Code for the Construction and Equipment of Mobile Offshore Drilling Units, 1989 
ISO 281 Rolling bearings - Dynamic load ratings and rating life 
ISO 898 Mechanical Properties of Fasteners 
ISO 8861 Engine-room ventilation in diesel-engined ships 
SOLAS 1974 SOLAS International Convention for the Safety of Life at Sea 
ISO 15609-1 Specification and Approval of Welding Procedures for Metallic Materials - Part 3: Welding Procedure Tests for the Arc Welding of Steels 
ISO 5817 Arc-welded joints in steel - Guidance on quality levels for imperfections 

A: General [Table of Contents] C: Informative References