The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.

[Book] [Expand] [Collapse] [Search Forms] [Previous Section with Hits] [Next Section with Hits] [Clear Search] [Help]

Expand Search

Sec.8: Identification and Records [Table of Contents] Ch.3: Certification and Classification

DNV-OS-E304 Offshore Mooring Steel Wire Ropes

[-] Ch.2: Technical Provisions
[-] Sec.8: Identification and Records
[-] A: General

Ch.2 Sec.8
A. General

Ch.2 Sec.8
A 100   Identification

Ch.2 Sec.8 A
101   All parts shall be clearly marked and identifiable to ease quality control, handling, assembly and installation.

Ch.2 Sec.8 A
102   Each wire rope segment shall be marked at each end with a unique identifier traceable to appropriate certification.

Ch.2 Sec.8
A 200   Records

Ch.2 Sec.8 A
201   The socket manufacturer shall maintain traceable records of the following and present them to the purchaser on request:
—steelmaking process and chemical composition
—heat treatment
—mechanical testing
—inspection
—repair.


Ch.2 Sec.8 A
202   Each wire rope segment shall be supplied with one certificate. The certificate should refer to the following:
—purchase order No.
—design verification reports
—sheathing process reports (if relevant)
—3.2 Inspection Certificates for the sockets including the resin
—3.2 Inspection Certificates for the individual wires.


Ch.2 Sec.8 A
203   In addition the certificate should contain the wire rope construction and rope built up and a statement saying that the wire rope has been manufactured and inspected and found to be in accordance with this standard.
Sec.8: Identification and Records [Table of Contents] Ch.3: Certification and Classification