![[Table of Contents]](/dwicons/b_toc.gif)
The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
|
|
DNV-OS-F101 Submarine Pipeline Systems |
![[-]](/dwicons/i_colpse.gif)
| App.D: Non-Destructive Testing (NDT) |
|
| A: General |
| A100: Objective |
| A200: Applicability of requirements |
| A300: Quality assurance |
| A400: Non-destructive testing methods |
| A500: Personnel qualifications |
| A600: Timing of NDT |
|
| B: Manual Non-Destructive Testing and Visual Examination of Welds |
| B100: General |
| B200: Radiographic testing of welds |
| B300: Manual ultrasonic testing of welds in C-Mn/low alloy steel with C-Mn/low alloy steel weld deposits |
| B400: Manual ultrasonic testing of welds with CRA (duplex, other stainless steels and nickel alloy steel) weld deposits |
| B500: Manual magnetic particle testing of welds |
| B600: Manual liquid penetrant testing of welds |
| B700: Manual eddy current testing of welds |
| B800: Visual examination of welds |
| B900: Acceptance criteria for manual non-destructive testing of welds with nominal strains < 0.4% and no ECA |
| B1000: ECA based non-destructive testing acceptance criteria for pipeline girth welds |
| B1100: Repair of welds |
|
| C: Manual Non-destructive testing and Visual Examination of Plate, Pipe and Weld Overlay |
| C100: General |
| C200: Plate and pipe |
| C300: Weld overlay |
| C400: Visual examination |
| C500: Residual magnetism |
| C600: Acceptance criteria for manual non-destructive testing of plate, pipe and weld overlay |
|
| D: Non-destructive Testing and Visual Examination of Forgings |
| D100: General |
| D200: Ultrasonic and magnetic particle testing of C-Mn and low alloy steel forgings |
| D300: Ultrasonic and liquid penetrant testing of duplex stainless steel forgings |
| D400: Visual examination of forgings |
| D500: Acceptance criteria for forgings |
|
| E: Non-destructive Testing and Visual Examination of Castings |
| E100: General |
| E200: Ultrasonic and magnetic particle testing of C-Mn and low alloy steel castings |
| E300: Ultrasonic and liquid penetrant testing of duplex stainless steel castings |
| E400: Radiographic testing of castings |
| E500: Visual examination of castings |
| E600: Acceptance criteria for castings |
|
| F: Automated Non-Destructive Testing |
| F100: General |
| F200: Documentation of function and operation |
| F300: Documentation of performance |
| F400: Qualification |
| F500: Evaluation of performance documentation |
|
| G: Non-Destructive Testing at Plate and Coil Mill |
| G100: General |
| G200: Ultrasonic testing of C-Mn steel and CRA plates |
| G300: Ultrasonic testing of CRA clad C-Mn steel plate |
| G400: Alternative test methods |
| G500: Disposition of plate and coil with unacceptable laminations or inclusions |
| G600: Visual examination of plate and coil |
| G700: Acceptance criteria and disposition of surface imperfections |
|
| H: Non-Destructive Testing of Linepipe at Pipe Mills |
| H100: General |
| H200: Suspect pipe |
| H300: Repair of suspect pipe |
| H400: General requirements for automated NDT systems |
| H500: Visual examination and residual magnetism |
| H600: Non-destructive testing of pipe ends not tested by automated NDT equipment |
| H700: Non-destructive testing of pipe ends |
| H800: Non-destructive testing of seamless pipe |
| H900: Non-destructive testing of HFW pipe |
| H1000: Non-destructive testing of CRA liner pipe |
| H1100: Non-destructive testing of lined pipe |
| H1200: Non-destructive testing of clad pipe |
| H1300: Non-destructive testing of SAWL and SAWH pipe |
| H1400: Manual NDT at pipe mills |
| H1500: Non-destructive testing of weld repair in pipe |
|
|