The electronic pdf versions of the documents found through http://www.dnv.com/ are the officially binding versions. Copyright Det Norske Veritas.
![[Table of Contents]](/dwicons/b_toc.gif)
|
DNV-OSS-101 Rules for Classification of Offshore Drilling and Support Units
|
Ch.2
SECTION 7
Service Notation Wind
Turbine Installation UnitCh.2 Sec.7
A. General
Ch.2 Sec.7
A 100 Introduction
Ch.2 Sec.7 A
101 This section identifies design and construction requirements
for assignment of service notation Wind Turbine Installation Unit.
Ch.2 Sec.7 A
102 Wind Turbine Installation Units are specially intended for
installation of fixed and floating wind power equipment such as:
| — | foundations |
| — | columns |
| — | generator house |
| — | blades. |
Ch.2 Sec.7 A
103 Units covered by this service notation is not intended for
operations related to development or production of hydrocarbons.
Ch.2 Sec.7 A
104 The requirements for main class (1A1) given in Sec.1 shall
be complied with. Specific requirements given in DNV-OS-J301 take
precedence over requirements for main class (1A1).Ch.2 Sec.7
B. General requirements for Wind Turbine Installation Unit
Ch.2 Sec.7
B 100 Column Stabilised or Self-elevating
Units
Ch.2 Sec.7 B
101 Design and construction requirements for assignment of service
notation Wind Turbine Installation Unit are
provided in DNV-OS-J301.Ch.2 Sec.7
B 200 Non Self-elevating Vessel
Ch.2 Sec.7 B
201 Design and construction requirements for assignment of service
notation Wind Turbine Installation Vessel is
provided in Rules for Classification of Ships Pt.5 Ch.7 Sec.22.Ch.2 Sec.7
C. Crane Installations
Ch.2 Sec.7
C 100 General
Ch.2 Sec.7 C
101 Wind Turbine Installation Units which are equipped with a
crane, and is specially intended for lifting purposes, shall in
addition to service notation Wind
Turbine Installation Unit be assigned the service notation Crane Unit as specified
in Sec.5 and shall comply with
the requirements of class notation CRANE as specified in Sec.6 H.
![[-]](/dwicons/i_colpse.gif)