DET NORSKE VERITAS
EC TYPE-EXAMINATION CERTIFICATE


A.1/4.33 344.1-001200-3

     

Det Norske Veritas

EC TYPE-EXAMINATION CERTIFICATE

Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive , issued as "Forskrift om Skipsutstyr" by the Norwegian Maritime Directorate. This Certificate is issued by Det Norske Veritas under the authority of the Government of the Kingdom of Norway.

CERTIFICATE NO. MED-B-6083

This is to certify that the

Track control system

with type designation(s)

Navi Sailor 4000 TCS

Manufacturer

Transas Ltd.
CORK
, Ireland

is found to comply with the requirements in the following Regulations/Standards:

Annex A.1, item No. A.1/4.33 and Annex B, Module B in the Directive. SOLAS 74 as amended, Regulation V/18 & V/19, IMO Res A.694(17) and IMO Res MSC. 74(69) & 191(79)

Further details of the equipment and conditions for certification are given overleaf.

(...

Høvik, 2010-04-21

for Det Norske Veritas AS

Notified Body No.: 0575

This Certificate is valid until

2015-04-21

Eivind Mykland

Head of Department

DNV local office:

Gothenburg

Arve Lepsøe

Surveyor

Product description

Unit Location

- NAVI SAILOR 4000/ 4100 ECDIS MFD Protected

- Heading control System Protected

For detailes, see Appendix.

For latest revision of the Appendix, see http://exchange.dnv.com/tari

Application/Limitation

· The installation shall be verified and tested onboard according to manufacturers installation instructions.

· See Appendix.

Type Examination documentation

See Appendix.

Tests carried out

· Performance testing, IEC 62065 (2002)

· Environmental testing, IEC 60945 (2002)

· Serial interface testing, IEC 61162 (2007)

· Performance testing, presentation, IEC 62288 (2008)

Marking of product

The Manufacturer and Type Designation to be applied to the equipment in a clearly visible location and in addition the equipment shall be marked with serial number, safe distance to magnetic compass, power consumption and/ or supply voltage.

Mark of Conformity

The manufacturer is allowed to affix the Mark of Conformity according to Article 11 in the Council Directive 96/98/EC on Marine Equipment and shall issue a Declaration of Conformity, only when the module D of Annex B in the same directive is fully complied with.

Module D: The quality system for production and testing shall be approved by the Notified Body.

USCG Approval

An U.S. Coast Guard approval number will be assigned to the equipment when the production module has been completed and will appear on the production module certificate (module D) as allowed by the "Agreement between the United States of America and the EEA EFTA states on the mutual recognition of certificates of conformity for marine equipment" signed 17 October 2005.

APPENDIX REV. NO. 2 (PAGE 1 OF 2)

Product description

 

Software

ECDIS:

Navi Sailor 4000 ECDIS MFD, or

Navi Sailor 4100 ECDIS MFD

2.00.xxx

2.00.xxx

Heading Control System (HCS):

Raytheon NP2025 Plus, consisting of:

- Operator unit

- Connection unit

Or,

Navis AP3000, AP3-MPP-B-0l (single/ linked rudders), consisting of:

- APM

- APP Master

- APP Back-up

Or,

Navis AP3000, AP3-2MPP-01 (independent rudders), consisting of:

- APM

- APP Stbd

- APP Port

Or,

Yokogawa PT500A, consisting of:

    - Auto Steering Unit

    - Terminal Unit

    - Annunciator Unit

Or,

EMRI SEM200, consisting of:

    - AEU511 Electronic Unit

    - MIP31 Control Panel

102-886 P04 E.00.xx

102-885 P01 E.00.xx

or

102-885 P01 E.01.xx

0206xx

0206xx

0606xx

0506xx

0706xx

0706xx

CR155 Kxx

CR081 B

CR080 B

Aeu2_3

Mip2

Application/Limitation

Type Examination documentation

APPENDIX REV. NO. 2 (PAGE 1 OF 2)

Type Examination documentation (continued)

Place and date

Høvik, 2010-04-21

__________________________

ARVE LEPSØE

END OF CERTIFICATE


Notice: The certificate is subject to terms and conditions overleaf. Any significant changes in design or construction of the product, or amendments to the Directive or Standards referenced above may render this certificate invalid. The product liability rests with the manufacturer or his representative in accordance with Council Directive 96/98/EC, as amended. The Mark of Conformity may only be affixed to the product and a Declaration of Conformity may only be issued when the production/product assessment module referred to in the council directive, is fully complied with.

If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million.In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas.


DET NORSKE VERITAS AS · VERITASVEIEN 1, 1322 HØVIK, NORWAY · TEL: (+47) 67 57 99 00 · FAX: (+47) 67 57 99 11

(

The Certificate is subject to terms and conditions overleaf. Any significant changes in design or construction of the product, or amendments to the Directive or Standards referenced above may render this Certificate invalid. The product liability rests with the manufacturer or his representative in accordance with Council Directive 96/98/EC, as amended. The Mark of Conformity may only be affixed to the product and a Declaration of Conformity may only be issued when the production/product assessment module referred to in the council directive, is fully complied with.